Models 5-22 / 5-26 32 G/G-A
Single roll clamps - Unsplit long arm |
5-2232G-13A | 3200 | 650 | 250-1300 | 1020 | 830 | 295 | 315 | 207 | 240 x 400 | 200 | 220 | 3 A |
5-2232G-13 | 3200 | 650 | 500-1300 | 1020 | 820 | 295 | 315 | 207 | 240 x 400 | 200 | 220 | 3 A |
5-2232G-14A | 3200 | 725 | 250-1450 | 1020 | 850 | 309 | 315 | 207 | 240 x 400 | 200 | 220 | 3 A |
5-2232G-14 | 3200 | 725 | 500-1450 | 1020 | 840 | 309 | 315 | 207 | 240 x 400 | 200 | 220 | 3 A |
5-2232G-15A | 3000 | 760 | 250-1520 | 1020 | 860 | 317 | 315 | 207 | 240 x 400 | 200 | 220 | 3 A |
5-2232G-15 | 3000 | 760 | 550-1520 | 1020 | 850 | 317 | 315 | 207 | 240 x 400 | 200 | 220 | 3 A |
5-2232G-16A | 2800 | 800 | 250-1600 | 1020 | 865 | 326 | 315 | 207 | 240 x 400 | 200 | 220 | 3 A |
5-2232G-16 | 2800 | 800 | 550-1600 | 1020 | 855 | 326 | 315 | 207 | 240 x 400 | 200 | 220 | 3 A |
5-2232G-18A | 2300 | 915 | 250-1830 | 1020 | 905 | 360 | 315 | 207 | 240 x 400 | 200 | 220 | 3 A |
5-2232G-18 | 2300 | 915 | 650-1830 | 1020 | 895 | 360 | 315 | 207 | 240 x 400 | 200 | 220 | 3 A |
1 - 2 roll clamps - Split long arm |
5-2632G-13A | 3200 | 650 | 250-1300 | 1020 | 820 | 285 | 315 | 207 | 240 x 400 | 200 | 220 | 3 A |
5-2632G-13 | 3200 | 650 | 500-1300 | 1020 | 810 | 285 | 315 | 207 | 240 x 400 | 200 | 220 | 3 A |
5-2632G-14A | 3200 | 725 | 250-1450 | 1020 | 840 | 299 | 315 | 207 | 240 x 400 | 200 | 220 | 3 A |
5-2632G-14 | 3200 | 725 | 500-1450 | 1020 | 830 | 299 | 315 | 207 | 240 x 400 | 200 | 220 | 3 A |
5-2632G-15A | 3000 | 760 | 250-1520 | 1020 | 850 | 307 | 315 | 207 | 240 x 400 | 200 | 220 | 3 A |
5-2632G-15 | 3000 | 760 | 550-1520 | 1020 | 840 | 307 | 315 | 207 | 240 x 400 | 200 | 220 | 3 A |
5-2632G-16A | 2800 | 800 | 250-1600 | 1020 | 855 | 316 | 315 | 207 | 240 x 400 | 200 | 220 | 3 A |
5-2632G-16 | 2800 | 800 | 550-1600 | 1020 | 845 | 316 | 315 | 207 | 240 x 400 | 200 | 220 | 3 A |
5-2632G-18A | 2300 | 915 | 250-1830 | 1020 | 895 | 350 | 315 | 207 | 240 x 400 | 200 | 220 | 3 A |
5-2632G-18 | 2300 | 915 | 650-1830 | 1020 | 885 | 350 | 315 | 207 | 240 x 400 | 200 | 220 | 3 A |
Notes:
- Two hydraulic functions required.
- Adjustable pressure relief valve is included.
- Short arm: adjustable at 45-degree rotation.
- Models 5-xxxx-xx with fixed (non-moving) short arm.
- Models 5-xxxx-xx-A with hydraulically positionable short arm.
- See hydraulic specifications page for pressure and flow rate recommendations.
- Standard contact pads: metal grain pattern with high-friction surface.
- Minimum 3,5-degree forward tilt on lift mast is required for horizontal handling.
Options:
- Special roll ranges.
- Models with “A” have a moveable short arm
- Contact pad options:
- - steel-sprayed
- - rubber faced
- - polyurethane faced.