> Platform locking system

This system allows to lock the table in the upper position. It consists of:

• Mechanical locking bolts coming out from the platform (long or short side) entering in the supports fitted in the wall (or supporting structure) for this purpose.
• Supports to be positioned in the wall (part of our supply).
• Automatic sequence operation via up-down push buttons control:
  - Lift: once the table reaches the high position (including short override to allow the operation) the bolts come out, the table descends to fit the supports.
  - Descent: before starting the descent the table lifts a little bit to allow the bolts to enter in the platform before starting the lowering operation.
  

Available both pneumatic and hydraulic operated. In case of pneumatic version, it is necessary to get an air source available on site.

Important! The platform size increases to accommodate the system. Please consult Factory.
It is recommended when an uncontrolled descent of the table (for example due to oil leakages or hydraulic failure) could produce a hazard for person. For example where the elevated platform forms part of a floor (EN 1570-1 5.8.10).