Supplied on request bolted-on version, with handrail, knee and toe board on one or more sides of the platform.
For removable execution (not available for platform width < 800 mm) it is necessary to provide an interlock switch.
- Safety European Standard EN 1570-1 (5.2.9.1) requires that tables which are designed to be entered by the operators must be provided with guard rails to prevent persons falling more than 0,5 m from the platform.
- On the lift tables intended to carry operators (on board during lifting and lowering movement) there must be provided a control device onto the platform (EN 1570-1 5.5. Operator position 5.5.1). In case of no additional control provided a separate emergency stop switch is mandatory (5.5.7) in order to allow a second person to take action in case the operator on the platform can no longer operate the table due to a defect of the control.
- Platforms, which are entered by persons, shall be fitted with an anti-slip surface. (EN 1570-1 (5.4.1.))
Attention! The minimum clear horizontal distance between the safety hand rails and structure of a machine or wall shall be 100 mm. (EN 1570-1 5.2.10.3). To protect against trapping or possible dangerous situation, where the clearance is less than 120 mm the hand rails must be surfaced with a rigid material (EN 1570-1 5.2.10.6)
Canada
United States
Brasile
Other Countries
Australia
PR China
Japan
India
Indonesia
Malaysia
Thailand
Vietnam
Singapore
Republic of Korea
Sri Lanka
Belgium
Finland
France
Germany
Italy
Netherlands
Luxembourg
Poland
Spain
Sweden
United Kingdom
French
Belgian